Supply Stop Valves
1/2" Brass, Copper x Copper, Lead Free, Stop & Waste Valve, For Use With Water, Oil, & Air, Cast Iron Handle, Allows Draining Of The Non-Pressure Side Of Valve When Closed, Solder Ends Comply With ANSI B16.18.
3/4", Brass, Copper x Copper, Lead Free, Stop & Waste Valve, For Use With Water, Oil, & Air, Cast Iron Handle, Allows Draining Of The Non-Pressure Side Of Valve When Closed, Solder Ends Comply With Ansi B16.18.
1/2" Compression, Brass, Lead Free, Stop Valve Plus Drain Cap, Heavy Brass Construction, 5/8" OD, Large Flow Area, Heavy Cast Iron Handle, Neoprene Seal Disc, Compression Ends For Solderless Connection To Copper Tubing, For Use With Water, Oil Or Air.
1/2", Brass, Lead Free, Threaded Stop Valve, For Use With Water, Oil, Or Air, Cast Iron Handle, Threaded Ends Comply With ANSI B1.20.1.
1/2" Barb Insert x 1/2" Barb Insert, Chrome Plated Brass, Lead Free, Straight Stop, Oval Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743, Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Barb Insert x 3/8" OD Compression Angle Stop, Chrome Plated Brass, Lead Free, 1/4 Turn, Oval Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743, Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Barb Insert x 1/2" Male Pipe Thread, Chrome Plated Brass, Lead Free, Straight Stop, 1/4 Turn, Lever Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743, Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Chrome Plated Barb Insert x 3/4" Male, Lead Free, Garden Hose Angle Stop, Multi-Turn Oval Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Chrome Plated Barb Inert x 3/8" Brass Barb Insert, Lead Free, Straight Stop, Multi-Turn Oval Handle, Use With TV #608-933 Cinch Clamps, Need Cinch Tool TV #608-743, Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 Phi, NSF Listed Brass Inserts, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degrees Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Female Pipe Thread Inlet x 3/8" O.D. Compression Outlet, Chrome, Angle Stop Valve, California & Vermont Lead Free Compliant Product, Carded.
5/8" O.D. Compression Inlet x 3/8" O.D. Compression Outlet, Chrome, Straight Valve, California & Vermont Lead Free Compliant Product, Carded.
5/8" O.D. Compression Inlet x 1/4" O.D. Compression Outlet, Chrome, Angle Valve, Frequently Used For Ice Makers, California & Vermont Lead Free Compliant Product, Carded.
5/8" O.D. Compression Inlet x 3/8" O.D. Compression Outlet, Chrome, Angle Valve, California & Vermont Lead Free Compliant Product, Carded.
5/8" O.D. Compression Inlet x 3/8" O.D. Compression Outlet, Coarse Thread Style, Chrome, Angle Valve, California & Vermont Lead Free Compliant Product, Carded.
1/2" Female Pipe Thread Inlet x 1/4" O.D. Compression Outlet, Chrome Angle Valve, Frequently Used For Ice Makers & Humidifiers, California & Vermont Lead Free Compliant Product, Carded.